Flash Media Server 5.0 and server testing


#1
  1. I was able to change the FBE address to 10.1.10.168 and log into the console. What FMS server address should I use for testing? The one in the book says rtmp://192.168.1.100:1935/live/hdmi.
    Should I change it to rtmp://10.1.10.100:1935/live/hdmi ? I had tried both and it hasn’t worked yet.
  2. I installed Flash Media Server 5.0. What settings do I use for the username and password to log into the server - the login for HD live admin console or the username and password I needed to install Flash Media Server?
  3. Do I set the RTMP for this in the Main RTMP, the Ext RTMP or 3rd RTMP?

#2

my friend:

  1. when you set the feb200 to 10.1.10.168, you need to try rtsp://10.1.10.168:554/main to check the encoder output is good.

look it here:How to view you streaming with VLC to check the hdmi video encoder

2.I installed Flash Media Server 5.0. What settings do I use for the username and password to log into the server - the login for HD live admin console or the username and password I needed to install Flash Media Server?

no, it is for different use ,forget it.

3.Do I set the RTMP for this in the Main RTMP, the Ext RTMP or 3rd RTMP?
Just use one ,or use 3 to different rtmp.

have a good day
tomlee